Question about Dualit Kitchen Appliances - Others
I changed the element in my Dualit toaster; still doesn't work I changed the center element in my Dualit toaster. I noticed the wire connecting the element was blackened. I replaced the element, put ...
old westinghouse toaster 1941 One of the heating elements has broken. It is a thin wire that stuck out a little too far and it finally broke. Can it be fixed? that part was almost replaceable. ...
Question about Dualit Kitchen Appliances - Others
...it 'blows up' when plugged in. What to do? Probably one wire Loosen up or a wire from one heating element have cut off and is contacting the metal body of the toaster. You need a good visual insect ...
Question about Bodum Kitchen Appliances - Others
Only the side elements are working on the toaster. The middle elements which would toast one side of a slice of bread are not working. Is it possible to repair/replace the middle elements? Maybe. ...
Question about Dualit Kitchen Appliances - Others
Dualit Toaster trips RCD on consumer unit as soon as the timer switch is turned One of elements, or one of the wires have be cut and is touching the metallic body so you need to replace the element or
My hat I tq-300 toaster will toast buns but the top elements will not get hot. How do I diagnose the problem? wiring to heating element or connector to this heating element is fried.
...Are you willing to tear into it, and check it out further? Your toaster likely has 4 heating elements, correct? (Or possibly 3-- if the center shares toasting the 'inside' of both slices all ...
Question about Kitchen Appliances - Others
the two inside elements do not toast. The outside the two inside elements do not toast. The outside elements work fine. It is the Cuisinart Total Touch Electronic You either have a stuck/defective ...
Question about Dualit Kitchen Appliances - Others
Replacing the elements on a Dualit 2-slice How do I remove the existing heat elements to replace them with new ones? You can find out how to replace the heat elements and purchase replacements at the ...
RH end element was not heating to same temperature as middle element. Bought and fitted new end element but still same problem ie this new element still not heating to correct temperature high causing
11 questions posted
Usually answered in minutes!
31 Questions
14 Questions
1 Questions
4 Questions
2 Questions