Oreck XL Ultra Bagged Upright Vacuum "roller not turn" Questions

Ad

...roller to not turn. Also make sure the roller brush is free of any debris. Use this link to access your vacuum to change belt or clean the roller brush. ...

Ad

...turn Roller will not turn. Have checked belt - removed strings from roller. Vacuum has suction, but the roller will not turn. try pushing the reset button..its a little red usually located on the ...

Ad

Question about Cirrus Vacuums

1 Answer

...turn the roller (which can't turn), and this generates a lot of heat in just a few seconds. You can find belts at places like Sears, Home Depot, or your local vacuum shop. For just the roller: Turn ...

Question about Bissell Vacuums

1 Answer

...checked the belt, cleaned and replaced airfilters, it might be the thing that is on the end of the roller, can't figure anything out, need help carpet looking pretty bad! Try turning the vacuum on ...

...Roller will not turn Has suction, but the roller will not turn. Have checked belt - cleaned string from roller - any suggestions check if there is a reset button, if so simply push the button..other ...

Question about Filter Queen Vacuums

2 Answers

...Turn the roller manually, does there seem like there is any resistance, or does the roller spin freely? If there is no resistance, your belt is broken. If you have a new belt, unscrew the screws that ...

Question about Dirt Devil Vacuums

1 Answer

...roller would not turn at all but is supposed to with no effort. on some models the end caps pop off but most are one piece and are just discarded and a new roller bought - seems to be $10-$20 for one ...

...roller will not turn Try these steps: Check the button that turns off the roller brush to make sure you didn't press it by accident. Unplug the vacuum and clear pet hair and other debris off the ...

...turn the roller. It is possible that the roller is in need of servicing. If the bearings in the roller are fouled with dirt and hair, they will not turn properly and a new belt will not solve your ...

...turn.The roller is about a year old and was working fine. The ends turn If the roller ends turn (are not jammed by hair etc.), then there are tthree things to look at: 1. Is the belt that drives the ...

Not finding what you are looking for?
Oreck XL Ultra Bagged Upright Vacuum Logo

330 questions posted

Ask a Question

Usually answered in minutes!

Top Oreck Vacuums Experts

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

hsapiens

Level 1 Expert

6 Answers

Are you an Oreck Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...