Oreck XLS700A Upright Vacuum "belt slips" Questions

Ad

...belt slips off. Is there some kind off pin that fell off of the motor bar that is supposed to hold the belt on? The belt is the coorect size and new. The roller spins fine. Hello! There is no other ...

Ad

...Is there an adjustment to a switch that can be made? Is it the actual motor stopping or the belt that spins the brush that's slipping? if its belt slip, this happens, pretty common on all

Ad

Question about Hoover Vacuums

2 Answers

...Belt slips off and rubs causing burning smell from the belt over heating. Of course this puts an indent into the belt and has to be replaced. How do I keep the belt from slipping off? I see no place ...

Question about Hoover Vacuums

2 Answers

...belt on my Hoover U6439 slips off almost everytime I use it. The belt although not broken has been stretched. You need to replace with a new genuine belt, which will me about 3/4 the size of a ...

belt slipped off while in use and now it's not moving at all The belt has probably stretched and that is why it slipped off. I would try changing the belt it should take care of the problem. You can ...

...belt slips off and the brush stops spinning. Belts aren't burned through or busted, just slipping off. It seems as soon as we go from the floor to the carpet it breaks. I have changed the belts three ...

Question about Dirt Devil Vacuums

1 Answer

Belt slips off motorshaft Bought dirt devil vacumme featherlight upright with bag. When I run it the belt slips off the motor shaft. I followed all direction in manuel and suggestion to reset th ...

...belt slips off. Only the original very-worn belt seems to work. I manually turned the roller and can see that the belt wants to wander off of the roller, but I cannot see any apparent reason why it ...

Question about Eureka Vacuums

1 Answer

Slipping belt onto motor shaft pulley Trying to put belt on a Eureka "Boss." Much like a toilet paper dispenser, the motor shaft pully sits in a plastic channel, turning in place on two pegs. I can't ...

...belt back, but it slips off again. The belts aren't supposed to stretch. I am going to call Sebo and take mine to an authorized service place to make sure that it is just a stretched belt. Ryan ...

Not finding what you are looking for?
Oreck XLS700A Upright Vacuum Logo

17 questions posted

Ask a Question

Usually answered in minutes!

Top Oreck Vacuums Experts

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

hsapiens

Level 1 Expert

6 Answers

Are you an Oreck Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...