Question about Dirt Devil Vacuums
...belt slips off. Is there some kind off pin that fell off of the motor bar that is supposed to hold the belt on? The belt is the coorect size and new. The roller spins fine. Hello! There is no other ...
Question about Kirby Vacuums
...belt off position! Help! Go to utube Before removing power nozzle from vacuum turn hook to belt off Take power nozzle from the vacuum and turn hook to belt on change belt Turn hook to belt off attach ...
...off the smaller belt motor pulley first before putting on a new larger drive belt. If the smaller belt is still intact and you only need to replace the larger belt, you'll still have to take off both ...
belt fell off, how do I replace it Which belt? There are 2 on a Pro Heat. The pump belt which is pretty straight forward to put on. If it's the brush belt you will probably have to take the brush off.
...belt off, but when i turn it it lift's it up and can't line up with the belt off label. Then, when I turn it the other way, it's off. So I've been trying to pull it off so when it lines up with belt ...
Question about Bissell Vacuums
...off. The belt is new the roller brush is clean and it not damaged or broke but the belt still slips off! Can anyone suggest how to prevent it from slipping? worn belt--wrong belt--motor shaft damage ...
...belt comes off Belt comes off almost immediately. I new belt has no effect. The belt will stay on with the handle in the upright position. Once the handle in lowered and the brush is in contact with ...
...Belt slips off and rubs causing burning smell from the belt over heating. Of course this puts an indent into the belt and has to be replaced. How do I keep the belt from slipping off? I see no place ...
...belt off." the belt is just loose around the brush roll. the vacuum still works, it just doesn't seem right to have the belt on there if it's not "on" anything. how do i use the "belt on, belt off" ...
...belt is off the shaft then you may be able to rotate the bar when off. If the bar has seized ... then turning the motor on can result in overheating the belt ... you may smell "burnt rubber" .... and ...
66 questions posted
Usually answered in minutes!
230 Questions
81 Questions
34 Questions
29 Questions
18 Questions