XL is shooting dust out from the roller when I try to vacumn This is a sign that the bag is full or there's a clog in the air flow piping. Check behind the brush for clogs and remove if there is. Open
...clear and finally to check that there is no clogging at the top of the back spine as well. Oreck XL can become clogged quite quickly due to its relatively small suction tube openings and small
vacuum stopped working and wont run vacuum stopped working and wont start again Check the cord to be sure its not broken anywhere. Check the roller, it may be clogged
Question about Oreck Vacuums
...clog under the roller? FLIP UP SIDE DOWN AND REMOVE COVER AND CLEAN BRUSH,SOMETHING MAY BE WEDGED IN THERE,I HAVE ON TOO.IF YOU NSTILL HAVE YOUR WARRANTHY,THEY WILL TUNE FOR FREE,I KEEP EXTRA ...
no suction/ bag doesnt inflate model u3700 Check for a clog in the base or in the handle tube.
ORECK VACCUM older oreck xl, new belt , new bag, checked for clogs, does not pick up as it used to, and, much harder to push, seems to grab or drag, why???? ...
not picking up dirt. hardly no suction not picking up dirt. hardly no suction if your model has a hose for a wand or brush attachment then remove the hose and check it for clogs.
no suction Probably clogged. Check the tube in the back of unit. Check under the baseplate if tube is clear....
...XL off and check this area of your vacuum. Remove any noticeable debris, such as hair. Manually rotate your brush roll to unearth any hidden clogs behind the roller. Check your Oreck XLs belt. Make ...
40 questions posted
Usually answered in minutes!
230 Questions
81 Questions
49 Questions
34 Questions
18 Questions