...dog I have a Viking 6690 that belonged to my mother. I cannot find the instruction manual and can't get the feed dogs to come up. She was quite the quilter so I suspect that they were lowered so that ...
Viking 940 using switch to lower feed dog to remove stitch plate it worked. But after cleaning and replacing stitch plate the feed dog switch doesn't raise the feed dog to enable material to be pulled
Question about Sewing Machines
...dog is full of dust and dirt. Clean with the brush. ...
...dog on my Husqvarna viking 230 sewing machine. I've set the stitch length knob to the "drop feed dog" sign, it clicks, but the feed dog is not lowered. When I start the machine, it sews backwards. ...
...feed dogs on my viking Prisma 990 will move up and down but wont advance the fabric back, the stitch length is set and the button for dropping the feed dogs is not engaged. So they will only move up ...
Viking no longer making circuit board for 990-- or, that machine can't be fixed. Is it that the feed dogs won't go up and down, or that you can't adjust the stitch length? If the feed dogs won
...the pressure foot or the switch in the back to lower the feed dogs! The switch in the back will lower the feed dogs. If you need a manual - I found a PDF download by googling: viking emerald 183 ...
Question about Husqvarna Sewing Machines
...feed dogs on my Viking E10. Thanks! There is a switch on machine to raise feed dogs up/down. Remove any extension table to locate it because many of these options are located in the back of machine ...
dog stepper motor may need to be replaced. These tasks have to be done by a certified Husqvarna Viking service technician. Suggest that you take it to an authorized husqvarna viking dealer for service
...dog step motor gone bad. You should have your machine serviced by an authorized Husqvarna Viking dealer. You can find your nearest dealer at the Husqvarna Viking website - ...
57 questions posted
Usually answered in minutes!
126 Questions
125 Questions
111 Questions
69 Questions