Question about Sewing Machines
...turn wheel, is very tight, doesn't sew good When I try to sew, I have to guide my material, the wheel is so tight You didn't tell us what machine you have, but if it's an older mechanical machine, ...
...tight, screw the screw back up in the stop motion wheel, a final turn one the the stop motion wheel to tighten then test, if it does not work put the three pronged washer in a different position even ...
...snarled that even the handwheel won't turn. If it's an older mechanical, it has probably seized due to old oil that has dried. Wheel on right side that controls the needle up and down is very
Question about Janome Sewing Machines
...at the upper and lower shafts for thread wraps or dirt, properly lubricate the bushings, turn machine by hand and try to find tight spots. no sense putting in a new fuse until the problem is
...tight and hard to turn foot feed is very slow and tight not knowing your machine make or model, I can only suggest that you are having "tension" issues. Most machines have tension control located ...
Question about Brother Sewing Machines
...new but the hand wheel will not turn easliy, very tight and then it completely stops, does anyone know what this could be? if the machine is brand new then it needs to go back & get another ...
Question about Sewing Machines
turn the hand wheel forward. Now move the needle to the right and do this again. Did the hand wheel move all the way for one of the two sides the needle was placed? If your answer is yes then you need
...tight. Clean out and remove the bobbin/bobbin case. Now, try to turn it. Does it turn any better? If it does turn easily without the bobbin case and bobbin installed you know the bobbin case was out ...
...wheel ( that I The big wheel around my small wheel ( that I loosen for bobbin) is tight and does not want to turn. What can I do? Open the face plate and bobbin area to see if there is a thread
Question about PfaFF Sewing Machines
...clean area per machine instruction. There is a knob in the middle of the wheel. Make sure its not turned too tight. If its too loose the bobbin will tangle and if its too tight the needle wont
57 questions posted
Usually answered in minutes!
126 Questions
125 Questions
111 Questions
69 Questions