shuttle hook not moving on singer Machine is clean and cannot get the shuttle hook to move when turning fly wheel. It is a singer 413 probably means the shuttle is not positioned properly loosen the ...
...point downwards drop the into the shuttle, pull thread down to the bottom of side slot and then straight up under tension spring, load shuttle back into machine pointed towards you tension screw ...
...hitting shuttle ****. outside of slot in shuttle hits needle. Is needle bent? Are the feed dogs aligned? Shuttle clicked in? Is the needle set for zig zag? Could be one of those things. Best ...
Question about Brother Sewing Machines
slot 7. pull thread under tension spring 8. holding latch open position case into shuttle, and release latch. case should lock into place when latch is released happy sewing. regards please rated me..
Question about Sewing Machines
...slot perfectly. Once it is place into the
Shuttle it should be all even in the casing.
Ps. If you have removed the Shuttle front,
place it to fit in flat end up and fasten
the two ...
Question about Singer Sewing Machines
...slot engages thread. 5. pull thread diagonally across shuttle toward back of machine. 6. draw bobbin thread up through needle plate with threaded needle. I would check the user manual. I know it ...
...slot). Tip the machine backwards slightly and drop the bobbin door; take the bobbin out. Open the hook/shuttle retainer, but leave the hook/shuttle in the hook race. The point of the hook/shuttle ...
slot it goes into. It didn't appear to even bend the needle but now it makes an unusual fairly loud noise all the time, but is stitching ok. I'm afraid to use it. It is very clean and oiled. Check the
Question about Brother Sewing Machines
...shuttle back the right way and don't know if the bobbin is in the right way. The she Hold the bobbin case with open side towards you. The thread should unwind on the top of the bobbin from the left. ...
plastic shuttle not slotting into brother XL-2220 Please give instructions.with images on how bobbin to be placed and how thread comes out of plastic shuttle,then how shuttle is to be slotted, many ...
155 questions posted
Usually answered in minutes!
126 Questions
125 Questions
69 Questions
52 Questions