The needle is hitting the plate all of a sudden? If it hit all of a sudden it most likely was your needle got bent. Replace needle and don't pull the material. Let the foot do the work. The needle is ...
...needle on my machine appears to suddenly be too low. I was sewing, and there was suddenly a thudding noise as I sewed. When I next needed to rethread the needle, the needle is now too low for the ...
Question about Juki Sewing Machines
...needle. Suddenly the upper thread broke. After re-threading the machine, the bobbin will not pick up. Upper thread breaksneedle may be in backwardsRaise the needle bar to the highest point, then ...
my needle broke all of a sudden I am trying to create a lined tote bag using a light upholstery fabric. I did not have any problem sewing the toe bag with a 90/14 needle. All of a sudden when I tried ...
...needle. Suddenly, the needle hit the fabric and stopped moving up and down. The bobbin winder still works. Is something broken inside? The lower serpentine belt looks okay. sounds like the needle is ...
Question about Sewing Machines
My up and down needle handle stopped turning all of a sudden. Why? All of sudden I was sewing and the handle which causes the needle to go up and down, stopped turning. It's become almost impossible ...
...Suddenly there seems to be great loose needle tension -- the thread is knotting under the fabric and very little bobbin thread is being pulled out.... tried adjusting the needle tension practically ...
Question about Sewing Machines
...suddenly have 1" stitch. What can I do? skipped stitches 1. the needle is incorrectly inserted, bent, or blunt, the wrong size needle is being used 2. the needle and/or threads are not suitable for ...
...tensions but nothing seems to be working. Any help? Very important! Skipped stitches 1. The needle is not inserted correctly Remove needle & reinsert needle( flat side towards the back of ...
Question about Husqvarna Sewing Machines
...suddenly. I have rethreaded 3x, nothing visible in the bobbin case. Make sure you are using the correct bobbin, and that it was threaded properly. Check needle and plate to make sure there are no ...
155 questions posted
Usually answered in minutes!
126 Questions
125 Questions
69 Questions
52 Questions