Kenmore 15516 Mechanical Sewing Machine "bobin clockwise" Questions

bobin how do you know if you have the bobin in correct The thread should un-spool clockwise when looking down at it. good luck!

bobin thread keeps showing through I don't seem to be able to get the tension rightat Make sure thye top tension is about 4 or 5, tighten the bobbin tension screw on the bobbin case about a quarter of

...bobin? Drop the filled bobbin into the bobbin case with the bobbin spinning counter clockwise, slide the thread into the **** in the metal part of bobbin case at the 6:30 position, drag the tail of ...

thread tangled in the bobine as soon as i start sewing the thread gets tangled in the bobine. The front of the fabric looks ok, but the bottom is completely tangled. after a few stitches the machine ...

bobin and turn tension screw 1/8 turn anticlockwise 2. release top knob pressure about half turn, try to sew straight line again through double folded linen - still shredding? is thread in the middle

...clockwise. When you start sewing, hold onto the threads a little behind the foot and give them a little tension. I've found when the threads are completely loose, sometimes they get pulled down into ...

bobin and put it back into its place can you show me step by step Flip the presser switch up to raise the presser foot. Turn the hand wheel counterclockwise until the needle is in its highest position

...bobin area below, it catches on the "round about", so the whole point is that it misses the thread, and doesn't catch it, what can i do to fix this?? It sounds like your problem is as ...

...bobin the needle is still running. I believe it should be at a stand still. You don't way what machine you have. Most older machines disable the needle action by turning the inner handwheel counter ...

...bobin, with the thread threaded through the bobbin case, make sure that it spins counter clockwise. Also the problem could be caused by the machine not threaded correctly. But it is more likely the ...