feed dog is stuck The feed dog is stuck in the down position, and it will not adjust to the higher position when I adjust the feed dog control. Thanks I have the same problem...this is a work around, ...
feed dogs stuck in down position Feed dogs are stuck in the down position on my Brother Pacesetter ULT 2002D embroidery/sewing machine. They are suppose to be down when the embroidery unit is in place
Question about Kenmore Sewing Machines
...feed dog is stuck down,m the lever just does nothing. It lowered feed dog, then was useless when I went to raise it to position. your machine will have a flip type opening at the very front of your ...
...come up If the feed dog lever does not raise the feed dogs, then they are probably stuck. Probably needs lubrication. Since the make/model was not specified, would recommend taking it for service.
feed dog is stuck in the down position. Embroiders fine, but can't sew.I have tried the manual button, it moves back and forth, but doesn't move the feed dogs. Have cleaned the area. What next? if the
...feed dog will not advance the material I have a Singer Simple sewing machine and the a needle broke now thhe feed dog will not advance the material when I sew. The feed dog goes forward but will not ...
...feed dogs are clean--no debris stuck between the teeth, under the feed dogs, or around the bobbin case. If it is an older machine that has been used a lot, the feed dogs could be worn down and need ...
Question about Sewing Machines
...feed dogs on my Bernina are stuck in the down position and won't come back up. Anything I can do about this? Youtube videos Sewing Machine Feed Dogs bernina sewing machine feed dog adjustment ...
...feed dog is stuck in the down position, and it will not adjust to the higher position when I adjust the feed dog control. Thanks for your help! the best thing to do is have the feed dog check to see ...
Feed Dog on Brother 270d stuck in up position I have a brother 270d. I had to take the needle plate off because of a bunch of stuck thread. Now I can't get the metal plate back on. The feed dog is ...
156 questions posted
Usually answered in minutes!
125 Questions
111 Questions
69 Questions
52 Questions