Question about PfaFF Sewing Machines
...foot to darning position embroidery foot will not go into darningposition Hi, I hope this helps. If it doesn't post again. "Check: Place the sewing foot under the sewing foot holder so that the pins ...
...darning foot? Make sure that you have a darning foot that is compatible with your machine. I believe that the 7422 is a low shank foot; the appropriate daning foot is ...
Question about Sewing Machines
...darning foot installed--the darning foot is shorter than standard feet so there is space between it and the needleplate. Also, some machines have the ability to increase/decrease the presser foot ...
Question about Brother Sewing Machines
...foot or a darning foot? A darning foot is shorter in height so the fabric can be maneuvered without use of the feed dogs. Just some ideas. Could also be an embroidery setting that has not been ...
Question about Singer Sewing Machines
...darning foot, so the machine should be able to deactivate the feed dogs. I don't know of a feed control switch. However, lower your feed dogs by setting the length to zero. The Darning Plate is ...
...darn it dial on top of the machine used for The darn setting should lighten the pressure of the pressure foot and stop auto feed so you can sew in a random pattern. darning with sewing machine ...
Question about Sewing Machines
darning foot that is just a smidgen shorter so there is space between it and the needleplate for you to freely move the fabric. (Adding a Supreme Slider sheet to the work surface of your machine helps
...foot pressure on Darning setting. Don't forget to lower the presser foot lever. That's about it! Since you are going to be the feed dogs, it doesn't really matter if you have a stitch length set or ...
darning foot or other free motion foot. Attaching this foot disengages the the feed dogs.
Set machine for straight stitch. (Stitch length doesn't matter since the feed dogs have been disengaged
...darning foot or walking foot as the settings will be different in each case. Take it to a Brother service center if possible. They have a great Warranty and this will save a few dollars. If not ...
156 questions posted
Usually answered in minutes!
125 Questions
111 Questions
69 Questions
52 Questions