...10 min. again before it works... If the handwheel is tight and difficult to turn, then there is a bind somewhere. Could be debris in the hook raceway, thread caught in the take-up crank or a shaft ...
...clean it out and continue, but now I have the #10 light on and my machine will not allow me to monogram...what does the #10 light mean?? How do I fix it?? Manual for this machine is here: ...
...spool (bobbin) has run out of cotton. Is there a sensor or similar that requires cleaning ? Or worse! Remove bobbin case,clean sencers with a soft brush.At 10 o"clock and 5 O'clock positions
Question about Janome Sewing Machines
...can only be three things. Belt is slack / worn out and slipping. Motor is faulty. Foot pedal needs cleaning and lubrication inside.
Question about Sewing Machines
...10 stitches and the top thread breaks. Help! Is threaded correctly. New thread, and recently cleaned lint out of bobbin area. Try a new needle but it does sound like too tight a tension. Perhaps lint ...
Question about Baby Lock Sewing Machines
...10 needle with trimming sensor error. How do I clean this area? Hi, if the area is hard to reach, please use a q-tip and your choice of soap to clean the area. You might use a second q-tip to dry the ...
Question about PfaFF Sewing Machines
...or 10 minutes, then stops and message comes up. after overnight rest, same thing happens. tension, cleaning is fine. It was sent for repair, told nothing wrong, yet message keeps coming up after
...been serviced but it's skipping stitches. Tried new needles, different types and different threads. Cleaned out the bobbin area, butility still skipping stitches any ideas? Here's a generic " 10 ...
68 questions posted
Usually answered in minutes!
126 Questions
125 Questions
111 Questions
69 Questions