...Bobbin winds loosely and doesn't stop when full You need to ensure that the thread is going from the thread spool at the back of the machine, through the eyelet, then around the silver ...
...machine. Or take your machine for service. ... BRAND new Janome 1420qdc. New needle, doesn’t need oil. Will NOT wind a bobbin. Used almost an entire spook of thread doing this. At my wits end.
Question about Bernina Sewing Machines
bobbin doesn't wind on evenly. If left to do it automatically it ends up wrapped around the bobbin spool. Is this normal? I have a new Bernina 350 and the bobbin doesn't wind on evenly. If
Question about Singer Sewing Machines
...doesn't move. there is no knocking or noises. It seems like I have it set to wind the bobbin, but I think I have it set correctly. if you have to undo the clutch to wind the bobbin, then try ...
...so that the bobbin will wind tightly, if this doesn't help,,then it's possible that the bobbin winder needs adjustment,, it needsto be taken to a sewing machine
why doesn't my bobbin holder move My bobbin won't move so i can wind the thread on it Have you put it in bobbin winding mode?
...make sure that your bobbin doesn't have any burrs. If it does, toss it and use a new
...find that this is the better solution to winding bobbins for this machine as winding them inside the bobbin housing doesn't give you a lot of control over the way the thread feeds onto the
...doesn't jump or bounce as you wind. Wind the bobbin to 3/4 full, then stop. And lastly, load the bobbin correctly following the manual directions, make sure it is turning the right way in the ...
60 questions posted
Usually answered in minutes!
126 Questions
125 Questions
111 Questions
69 Questions