Kenmore Drop-In Bobbin 505S-21BH Mechanical Sewing Machine "material stuck feed dogs" Questions

...advance the material when I sew. The feed dog goes forward but will not go up and down. Call Singer at 1-800-4singer and they will help you. I think a piece of the needle may be stuck in your feed ...

...stuck in the in position won't come out to raise feed dogs? "FEED DOG BUTTON" ISN'T QUITE CLEAR. HOWEVER, THE FEED DOG IS CONTROLLED BY THE STITCH LENGTH. IF THE STITCH LENGTH IS SET TO ZERO THE FEED ...

material. It looks like it is thick and somewhat slippery. Your feed dogs are not working in unison. Use a soft toothbrush and gently clean the feed dog teeth--there may be gunk stuck so the teeth are

...Material wont feed through. Stiches not forming. dogs are up and needle moves up and down freely. I have checked everything else I can think of. Any suggestions. Hm, could be several things. If ...

...material not feeding thru Is your machine mechanical? If so, sounds like the feed dogs are stuck in the lowered position. Needs good cleaning and oiling. Perhaps this will help: The feed dog knob won ...

...material it sounds like it is running fine and wheel is turning correctly what is the problem? check to see if the feed dogs are dropped(darning mode), or lift the needleplate and clean out lint or ...

...stuck...physically lift up the feed dog with your fingernail or a flat screw driver or something (once the plate is off), then push the feed dog lever across and release the feed dog. It should hold ...

material through to sew on its own, its like it is stuck in one spot, if we keep it set on 0, it will move the material along but it will skip. If we set it any higher, it will sew in one spot and not

stuck in material gets stuck in the bobbin thread while sewing, janome 4900mc have changed bobbin thread & thread a few times cleaned maching not sure why happening. check and see if the feed dogs

...material gets stuck. Am guessing you've already verified the feed dogs are in the raised position. The other thing to check is the presser foot pressure. If you are sewing lighter weight fabric, you ...