red with lines going through it. I am willing to fix it but not sure what is wrong. The set is approx 8-10 years old your problem is in red video output circuit. as you are seeing lines with red color
red screen i have a philips 35p500 c101 the screen its all red it is due to problem in red cathode section in your tv. you can check 1 vlotage on red video ckt. 2 loose or print cut in red ckt 3 crt ...
Red Line across Screen We were watching Tv and all of a sudden a long white line showed up across the tv which changed into a red line. There is no picture. When I turn off a white line shows. When I ...
Question about Hitachi Televison & Video
red/orange problems Takes several minutes to come on after power button is pressed. Intermittent discoloration red/greens across middle half. It varies according to picture content. Cartoons and large
Sony KV-D2912U A red line right acroos a blank screen, line works it's way up to the top of the screen and sound and vision both normal. Red line takes about 5 minutes to go away. G2 Volts OK. Are u ...
Question about Sony Televison & Video
...lines it is due to 1 supply to red out put is absent 2 problem in red video output 3 loose contact in red output ckt 4 connector loose 5 crt base loose 6 circuit from red output of chroma ic to red ...
Question about Panasonic Televison & Video
...right hand side. Both problems with colours and lines the same on all channels as well as when viewing DVD/VHS. Is it dying? your problem is in red video circuit. please get it done with skilled
shuts down Turns on,3 to 5 seconds a blue video veil comes across the screen from both sides and shuts down. it is due to problem in red cideo section. solution 1 supply to red video output& output ...
...red with lines through it This problem occurs when there is defect in the chroma demodulator circuit. The usual symtom is a red or magenta color rastor with white retrace lines about 3/4' apart ...
red vertical convergant line the red vertical convergant line is wavy ,not strait, and will not move. What could be the problem? Thank you. Jesse James You need to replace the two Convergence IC's and
15 questions posted
Usually answered in minutes!
193 Questions
97 Questions
59 Questions