Apex Digital GT2711 27" TV "broken tuner" Questions

tuner circuit board is not broken, you can solder this back onto tuner, and solder the end back on the circuit board. You should take the tuner out to do this proceedure. A TV shop usually charges $50

...broken. the one I think has a motherboard problem and the other lost its tuner can I swap tuners and get one working again. both are the same size tv but different brands> ive never had a problem ...

...broken tuner. It can be quite fiddly as you have to de-solder the old one without damaging the tuner unit and disconnect the the soldered wire that goes from the tuner pcb to the socket`s terminal ...

...tuner board has been broken where the ant.cable is pluged in. A small portion is missing if I could get a good picture it could be repaired. [email protected] no the tuner may be damaged and have ...

coax that cable etc. screws into is broke off...can this be replaced? yes but have to take tuner out to replace coax conn. and may have broken traces in tuner can purhase new tuner also at tritronics

toshiba tv no place to insert my ariel Your problem is the tuner socket has broken off. You can either install anew tuner unit or replaced the tuner socket which is a bit more fiddle.

...but you can face the probelm, without replacing the tuner. When making these connections, use sigle cored shield wire. It center wire must connect to the center pole of the broken tuner socket.

...a RCA connector # SK25FCON. THIS PLUG ACCEPT SOLDER you have remove tuner and resolder connector back in place if it is not damaged and board in tuner not broken. TV shops charge $50.00 to do

...broken the coaxial hookup broke so you can't hookup the cable to it . i see that the connector is part of the tuner assembly which is 71 $ is ther e a way to fix that or does the tuner have to be ...

...and the leg of the connector has to be soldered to the circuit board, board has to be checked for cracks or if it is broken. If board is damaged the tuner will have to be replaced, if its