Question about Kenmore Vacuums
...power head. The switch activates the motor when the handle is lowered to use the vacuum. It should be in the power head to the side of the hinge. Sears says there are no parts presumably because it ...
power head motor dose not operate when switch on handle of vaccum central vac power head no getting power when switch is operated at the handle Its possible if the head is belt driven that it has ...
...power head directly to power without wands and see if’s working If it’s working you have problems in wands or true hose If power head is not working directly connected to power you have problem with ...
Question about Dyson Vacuums
...head There is no power to the motor brush head, but there is power to the off/on switch ,so I assume there is a fault in the wire or micro switch There is a micro switch that turns the brush roll on ...
...power head). These wires all pushed into the switch through 6 seperate holes. I was able to remove the wires without any problems. However, the switch that I ordered has only 4 wire leads coming out ...
Question about Electrolux Vacuums
power head quit working. It has suction power head off and all other attachments work. Hi, Try this. Remove the power nozzle from the lower wands. Remove the wands from the hose handle. Snap the power
Question about Vacuums
...any suggestions? Trace the wires back to the area of the power switch and see if you are getting power there. If so, check the continuity between the supply and the connection for the power
...power head on the vacuum generally does not work. I have tracked it to perhaps a loose wire at the spot where the tube attaches to the main unit. When the tube swivels, it makes the head work ...
587 questions posted
Usually answered in minutes!
62 Questions
3 Questions
1 Questions
1 Questions
2 Questions