cord is stuck in the vacuum and refuses to pull out. Hi there! If the cord is stuck and won't pull out, try gently pulling the cord while pressing the cord rewind button. Hope that helps! If you still
...stuck on your cord retractor. Take the machine apart untill you can see the retractor, then there is a button or wire that retracts the cord. If it is stuck in the down possition simply reset it, if ...
Question about Kenmore Vacuums
...cover to access the cord compartment Thank you very much. I'm up and running again. My retractable cord jump track and got stuck. Thank you thank you. And I did it myself with your directions. ...
Question about Hoover Vacuums
...cord is stuck. I would appreciate your input and support for ideas to take it apart. Jeff The cord is stuck. More often than not the spring tensioner that wraps the cord up fails and wont allow it to ...
cord getting stuck, won't come fully out. Hi My Dyson DC08 turbine is only letting me pull half the cord length out, it is as though it is coming out about 2 metres then getting stuck. It retracts ...
...cord stuck I have a Bosch Formula vacuum and the power cord is stuck inside. You need to take apart the reel. The cord is wound over itself and kinked. Be careful taking apart because if it gets away ...
...(4-5 inches)pressing on rewind button nothing happens....just stuck! This usually means the cord got twisted over itself. Pull it completely out and give slight resistance on cord and rewind it
cord winder stuck cord winder stuck ???????????
...cord got stuck and it stopped, but after I wiggled it, it worked again. Then the next time I couldn't get it to start. took cover off of cord, it looks fine, no fraying. Its an older model - G 2000 ...
587 questions posted
Usually answered in minutes!
62 Questions
3 Questions
1 Questions
1 Questions
2 Questions