Sanyo PLC XU33 Multimedia Projector "warning temp ready light" Questions

temp warning light and ready light flash no start up one of the sub-powerlines have been shortcircuited by defective smd capacitors. this results in powerfail mode with leds blinking

Start up problem Projector turns on, eiki screen comes up, screen goes out, the warning temp. and ready light flash. Disconnected power and tried to restart, same scenerio. Clean air flow filters

...not matter what the system is connected to. No light is projected from the projector lamp at any time. No other LEDs are lit (Lamp Replace or Warning Temp). theres prob something wrong wif the ...

...temp warning just ready indicator goes of and picture goes off. IF you wait a couple of minutes the ready light will come back on and if you push the on button the fan will start and the picture will ...

...warning temp. and ready lights flash at the same time. It seems to me it must be a sensor that tells it to shut down thinking that the machine is too hot-all the fans work and all of the filters are ...

temp warning light come on when the projector shuts off? if so you may also try cleaning the air vent filters and ensure there is proper air flow around the projector. if that checks out then have the

Warning Temp, Ready, & Lamp. When plugged in the Ready light is solid green and the Lamp light is solid red. When I push the on/off button a low fan comes on. After 15 seconds the Ready light goes