Sanyo PLC XU30 Multimedia Projector "replaced lamp warning" Questions

lamp is replaced and it still flashes the warning. How do I get it off? Press the left and right buttons, as well as the power button once the lamp has turned on. This will reset the lamp life counter

replaced the lamp but same warning goes on and projector do not function. Is there any other solution to run my projector? I had the same problem. There is an internal reset button just above the lamp

...lamp warning(orange), i order new lamp and install it by removing 2 cover screws and 2 lamp screws, i don't touch the glass, just use the flexible holder to give a little pressure, after re-cover and ...

...lamp has been replaced with correct type globe.The problem being without a remote control we cant remove the warning message now that we yhave replaced the globe.any ideas? Hi guys Firstly you need ...

...lamp warning light was not coming on. When I put it in for repairs it turned out to be the lamp that needed replacing. The technician said it is not uncomman for the lamp to be going and the lamp ...

..."flashing": warning lamp replacement "flashing": warning HelloWhat is the exact Brand name and Model number of your multimedia projector?  Give me these details by Fixya

SHOWING WARNING LIGHT Most projectors show a warning light when the lamp is about to burn out.Your owners manual usually suggest that you replace the lamp before the burn out .

Canon LV 5210's warning led turns red and turns off directkly after start. warning problem related to lamp, already encountered that kind of problem replace the lamp assembly and it work.

replaced bulb but still getting "lamp will fail soon replace" warning When you replace the lamp, you need to reset the lamp counter as well. The procedure for this should be in the owner's manual. ...

lamp warning light flashes and there is no projection to enable me to go into menu and re set. Is there a reset button on the projector itself ? Hi there There is normally a sequence of buttons on the