Question about Sharp Office Equipment & Supplies
...and lamp light are green for replaced bad lamp, power and lamp light are green for about 1 min then turn red ,but the lamp does not come on at all Yes you need to replace lamp,so you buy a new
Question about Panasonic Office Equipment & Supplies
...hours of usage: replace lamp first!Good luck,Alex. ballast and bulb good. system fires up, no pic. blinbking green light turns red after about 2 mins and system shuts down. new ...
replace the lamp in 5 minutes with diagram and procedure http://www.jangro.com/a/2006/08/03/how-to-change-your-samsung-dlp-lamp-in-5-minutes how to replace the ballast with diagram and procedure http:
Question about Sanyo Office Equipment & Supplies
lamp light to turn off on my sanyo xp57 projector. replaced the lamp and the lamp warning light won't shut off. Go into the menu and look for the settings icon. Under the setting icon you should see a
...replace lamp' light is not ON so I dont know if the problem is the lamp or the projector. try removing the lamp, usually quite easy, you need to find the door for the lamp. lamps are customer ...
...lamp won't light up. Remote doesn't work except for power-on/off and laser. On power-up, lamp lights for 5 seconds then shuts off and lamp LED indicator lights up red. After cool-down and shut-off, ...
Question about Optoma Office Equipment & Supplies
...light bulb once it still indicates that it needs to be replaced. This is the excerpt from the manual on how to reset the lamp life timer. Turn on the projector and use "Lamp Reset" after the lamp ...
Question about Sanyo Office Equipment & Supplies
...replace the lamp. In my personal opinion, kindly repair its power ballast unit immediately. for repair you pay only one forth of the cost of its lamp. Pls try immediately, or pls contact any service ...
Question about Mitsubishi Office Equipment & Supplies
...replace the lamp. The lamp is most likely WAYYYYY past its prime so I suggest starting there. Sometimes even if you had just replaced the lamp the new lamp could've blown. When there is no signal ...
Question about InFocus Office Equipment & Supplies
lamp? You can learn how to reset it on this LINK.... If after resetting, the light still remains green, then it's either the color wheel motor is not getting up to speed to sync with the dmd chip, the
154 questions posted
Usually answered in minutes!
44 Questions
49 Questions
35 Questions
18 Questions
21 Questions