Question about CTX Office Equipment & Supplies
...Input Connector (PC Digital (HDCP)/PC Analog/Component Video Input) 6. VGA In/SCART Connector (PC Analog Signal/Component Video Input, HDTV/SCART Input) 7. VGA Output Connector (Monitor Loop-through ...
...input ( 4 pin mini-DIN ) Depending on the output(s) available from your PC, you can use any of the following: a. the yellow RCA female b. S-Video output (4 pin mini-DIN ) c. VGA (which normally goes ...
Question about Epson Office Equipment & Supplies
RGB2. If your projector has only one RGB connector at the back it is still possible to use the video input for the second PC but you will need a special adaptor for the RGB cable from one of your PC's
...pc? Hook up using the S-Video port, the VGA port, RCA port, or the RS-232 port. The USB port is not used for input on at least some of the Viviteks as per Vivitek Service"The USB port is not in ...
Question about Sony Office Equipment & Supplies
...If the unit has a VGA ( PC ) input you can just get a Male / Male RGB / VGA Cable. If it doesn't have a PC input you can get a VGA / RGB to Component Cable wich is widely availabe from most PC
...input (laptop or pc) connecting. But it senses something connects. But when I connect something to video input (video camera) it works properly. This projector has 2 monitor input and there is an IC ...
...input - the preamp and digital switch. If so the board has to be checked which might need signal probe. Also it is also best to take the PC to test the output so as to confirm the PC ...
...INPUT FEED TO IT,DOES NOT PROVIDE DISPLAY.WE CHECK ITS SOURCE SELECTION OPTION FROM MENU.WE SELECT PC ON SOURCE SELECTION BUT NO SOURCE SELECTION C/OUT FROM MENU. try connecting a simple yellow ...
Question about InFocus Office Equipment & Supplies
pc input. Press the auto image button to get it to select the correct input. If you are using the PC as the dvd player, then change the display settings ie computer screen refresh rate, and resolution
pc vga output to the projector. then make sure the vga/rgb input source is selected on the projector. also select the lowest resolution on the pc to start with. when a picture appears on the projector
7 questions posted
Usually answered in minutes!
123 Questions
44 Questions
49 Questions
35 Questions
18 Questions
