is not square on screen right side considerably higer than left _ can't get it squared Have you tried the keystone correction. You must have the projector squared/lineup to the area you are projecting
square on the screen When the projector is on even without any inputs going through the projector the screen is full of small red square all over. I replaced the lamp thinking that was the problem but
...square MY PROJECTOR IS 4M FROM THE SCREEN. THE PICTURE IS WIDER AT THE BOTTOM THAN ON THE TOP. I HAVE CHANGED THE PICTURE TO ALL SISES BUT THE PROBLEM IS THE SAME ON ALL 3 SETTINGS. THE PICTURE ...
...square in the top left corner of the projection screen. How do we get rid of that? what model machine. When did the black square decide to appear on the unit It's the Picture In Picture function. Hit ...
Question about InFocus Office Equipment & Supplies
...screen. How do we square it up? if it looks like a trapezoid, you need to keystone it. you can either use the keystone buttons on the top panel or go into the menu under the image adjustments and ...
Question about InFocus Office Equipment & Supplies
...screen isn't displaying, it fades diagonally with a curve) I thought it was the bulb and replaced that but still have the same problems... **I noticed a spinning lense at the entrance of the housing ...
Question about InFocus Office Equipment & Supplies
...screen. Lamp replaced but still the same problem the light tunnel is either collapsing and blocking the light going through it (and needs replacement) or the vertical/hoizontal adjustment of the ...
Question about Mitsubishi Office Equipment & Supplies
...powers on just fine, and I am assuming the bulb is fine since it's projecting a bright blue square. Blue is probably the default "no signal" screen. It means that the projector is getting no
...screen and then vanished. I tried the source button to no avail and have shut down and restarted several times. Please help! Thank you for your time, Polly Herman There is a function f-key combo that ...
screen. Any ideas help is greatly appreciated Again, this sounds like a light tunnel failure. See my other post about this. I replaced my light tunnel with square brass tubing I picked up at the hobby
16 questions posted
Usually answered in minutes!
123 Questions
44 Questions
49 Questions
35 Questions
18 Questions