...warning "no lamps available". or we should change a chip memory timmer for the lamps See the manual if there is a lamp timer that you will need to reset or maybe filter cleaning timer. Maybe it is ...
Question about Sanyo Office Equipment & Supplies
...filter warning light on Sanyo PLC-XL50a. Filter has been cleaned but lamp comes on for 25 seconds then power light flashes. How can I reset filter warning counter WITHOUT menu use.lamp not on Sanyo ...
warning lamp glow kindly suggest me how to solve the problem my projector xu 50 warning lamp is glowing thanks bedajit Hi Does your projector still work? The warning lamp is there to let you know ...
Question about Sony Office Equipment & Supplies
...filter warning sign comes up and then shuts the projector down in 1 min. I have changed the lamp and filter. How do i reset the timer for the Lamp Hours and get rid of the warning? Once the filter is ...
Question about Sanyo Office Equipment & Supplies
...warning goes on and projector do not function. Is there any other solution to run my projector? I had the same problem. There is an internal reset button just above the lamp that needs to be reset. ...
Question about Sanyo Office Equipment & Supplies
...WARNING indicator stops flashing. CHECK AND CLEAN THE AIR FILTER. Experience:- 1. if the temperature is very low than temperature sensor maybe misbehave. 2. If anyone fan not working so please you ...
Question about Mitsubishi Office Equipment & Supplies
...warning about lamp life over the past few months? If you were experiencing an overheating problem, a "TEMPERATURE!!" message would flash up on the screen just before the unit shuts down. If there is ...
Question about Sanyo Office Equipment & Supplies
Warning lamp blinks red. Tried new bulb just for kicks, but not the problem. Any ideas? Time to clean the air filters. See manual how to clean air filters and reset the filter cleaning counter in the ...
warning light follow this steps and fix it. God bless you Secure the lamp cover and the air filter cover of the projector body if the projector does not power on. Ensure that the power cable is firmly
Question about ViewSonic Office Equipment & Supplies
...filter timer reset warning notice (as I have always done), but then a minute later the projector goes into shut down mode, accompanied by a slightly more higher pitched fan noise. Does it need a new ...
16 questions posted
Usually answered in minutes!
123 Questions
44 Questions
49 Questions
35 Questions
18 Questions