Sanyo PLC XF45 Multimedia Projector "clean filter warning" Questions

...lamp blinks red. Tried new bulb just for kicks, but not the problem. Any ideas? Time to clean the air filters. See manual how to clean air filters and reset the filter cleaning counter in the

I get a filter warning message. What to do? Clean the filter, and in the user menu, you should be able to clear the message. I'd recommend cleaning the filters once a month.

...we should change a chip memory timmer for the lamps See the manual if there is a lamp timer that you will need to reset or maybe filter cleaning timer. Maybe it is time to clean the air vent

...warning light would continue to flash red and the power light would be solid red. You should clean the air filters. The filters are located on the underside. Disconnect all cables and invert. remove ...

...you need to clean dust filter and replace filter if required it depends on which model u are referring to this message is seen generally in the hi end models only - DLP range in access of 4000 ...

clean your filter warning sign comes up and then shuts the projector down in 1 min. I have changed the lamp and filter. How do i reset the timer for the Lamp Hours and get rid of the warning? Once the

...clean the air filter" can you give me a instruction. Clean or replace the air-filter after every 100 hours of use to prevent overheating, which could damage the projector. 1 Make sure the ...

...is a problem, usually overheating! Make sure it is well ventilated and that the filters have been cleaned. Try disconnecting the AC power cord and then reconnect it to check if it is still

clean the filter or filters. The internal fan will blow air out one side and pull fresh air in on the other side. Check the side with the air going in and see if there is a foam filter. It should easy

...filter warning light on Sanyo PLC-XL50a. Filter has been cleaned but lamp comes on for 25 seconds then power light flashes. How can I reset filter warning counter WITHOUT menu use.lamp not on Sanyo ...