common cause for a Ballast to go faulty is power failures & power spikes and off course lightning. I normally advise my clients to hook up a UPS to the Projector just to make the power supplied to the
no power - looks like power supply JUNK IT!!! ITS A COMMON PROBLEM WITH THIS MODEL EVEN DELL CANNOT FIX IT. ITS A FIRMWARE PROBLEM OR DESIGN PROBLEM THAT THEY CANNOT FIX. THEY DONT EVEN HAVE A ...
...are extra splotches of blue on the screen. Chances are your Blue and Green Lens' need replaced. Common problem with projectors that are used more than what they were designed
cannot get connected to notebook pc The most common problem is compatability of VGA signals. Check the input settings and the notebook settings, they must be the same otherwise the projector will ...
vertical lines Any resolution to the evenly spaced vertical line problem? Hi burton29 This is a common Mainboard failure with all makes and models of Projectors. Will unfortunately either have to be ...
...the problem stil occurs you will have to replace the Ballast ( lamp's powersupply ) This is a very common problem with this specific HP model. Hi, I have a VP 6120 Projector. It gave me a white
...shadow is always in the same place you will have to get one of the LCD's replaced. It is the most common problem a LCD causes on a
Question about Eiki Office Equipment & Supplies
...The lamp light was green before it turned off. broken lamp or bad rotation of the colourwheel, a common problem for this
...the bulb and when I plug it back in there is no power, no power light or anything. DS303 this is a common problem with optoma projector, if you replace the lamp yourself, it won't start!!
Question about Sanyo Office Equipment & Supplies
...off. Has it overheated? Has the lamp expired? Has a fan stopped working? Has the ballast unit failed? Which lamp is flashing? More details please if it is not one of those common problems. Thank ...
13 questions posted
Usually answered in minutes!
123 Questions
44 Questions
49 Questions
35 Questions
18 Questions