Question about InFocus Office Equipment & Supplies
Infocus X1 Projector started with 3 blinking red lights. Project started with 3 blinking red lights. Replaced bulb, reset to factory settings, but bulb lens cracked, so sent that one back and got ...
Question about SIM2 Office Equipment & Supplies
...Powers up displays Sim2 logo then lamp goes out power light starts to flash and turns off about 3 minutes later. Same thing every time it's turned on. Anyone had the same problem with a simple ...
Question about InFocus Office Equipment & Supplies
3 min. the lamp will come back on and the cycle will repeat. go into the menu and check the lamp hours. if it's over 2000, you need to replace the lamp. if it isn't, the power supply and/or ballast is
Question about Dwin Office Equipment & Supplies
i have a transvision 3 that starts up and runs fine. at some undetermined point the picture will flash back and forth from snow to the clear picture???? prestopete here...no kidding..I have the same ...
My Christie projector, DS+60 works fine for three hours. After 3 hours it starts flickering and the display brightness goes down. If we keep it off half an hour, the projector will work for another 3 ...
...on for a few seconds..I just replaced the bulb..still doing it. Green blinking light...fan for 2 - 3 seconds, fan stops for about 2-3 seconds, fans starts again for 2 -3 seconds, etc.... projector ...
Question about Panasonic Office Equipment & Supplies
...after seller insisted the iris had been replaced and the projector is "mint". It hasn't worked for more than 3 minutes at a time since I bought it. I did the lubrication fix on the ...
Question about Sanyo Office Equipment & Supplies
PLC-SW15 projector starts then shuts itself off after 2-3 minutes. After 3 or 4 tries it keeps going! Try cleaning out the air filters. This helped us with the same problem.
...where the flashes are constant. If we turn it off, then on again, the picture is fine for about 30 seconds before it starts acting up again. If the projector is left off overnight, then started, ...
...either. Neither is the indicator light. you need to replace the power supply. This happened to me 3 times. No lights at all. I let it sit for 2 weeks and it started working again all 3 times. ...
13 questions posted
Usually answered in minutes!
123 Questions
44 Questions
49 Questions
35 Questions
18 Questions