Sanyo PLV 70 Multimedia Projector "replace lamp warning" Questions

lamp warning light flashes and there is no projection to enable me to go into menu and re set. Is there a reset button on the projector itself ? Hi there There is normally a sequence of buttons on the

Replace lamp soon flashing during warm-up We had the projector flash the replace lamp warning, waited a bit to replace it, then did. Now the lamp is replaced and it still flashes the warning. How do I

replace lamp warning light goes on after raplacing it with the new lamp After a shortage of electricity the replace lamp warning light started to blink yellow. I have replaced the lamp but same ...

...replace before that happens. i have same problem, lamp warning(orange), i order new lamp and install it by removing 2 cover screws and 2 lamp screws, i don't touch the glass, just use the flexible ...

lamp needs replacing" warning message I am up on a mine site as a tecchnician and I am told the lamp has been replaced with correct type globe.The problem being without a remote control we cant remove

...lamp warning light was not coming on. When I put it in for repairs it turned out to be the lamp that needed replacing. The technician said it is not uncomman for the lamp to be going and the lamp ...

..."flashing": warning lamp replacement "flashing": warning HelloWhat is the exact Brand name and Model number of your multimedia projector?  Give me these details by Fixya

SHOWING WARNING LIGHT Most projectors show a warning light when the lamp is about to burn out.Your owners manual usually suggest that you replace the lamp before the burn out .

Canon LV 5210's warning led turns red and turns off directkly after start. warning problem related to lamp, already encountered that kind of problem replace the lamp assembly and it work.

...replace the lamp, you need to reset the lamp counter as well. The procedure for this should be in the owner's manual. This counter is a guide only. Lamps have an expected lifetime and the message ...