Daewoo DTS42 42 in. HD-Ready Plasma Television "nec vertical lines" Questions

...NEC LCD monitor suddenly starts 'weeping' and I get vertical black and white lines from the left up to middle of the screen Hello, IF YOU HAVE A SOLID BLACK LINE RUNNING VERTICALLY THEN YOU ...

nec plasmasync 4200w 3 vertical lines one yellow two purple This unit has 3 vertical lines -- which appear to be a pixel in width -- stretch from the bottom of the screen half way up. Two of the lines

nec plasma tv 42MP4 i HAVE THREE(3) VERTICAL BLACK LINES ON MY PLASMA SCREEN HOW CAN I FIX IT.. techwood 42ins plasma has two wide vertical black bars these plasma vertical black lines are notorious. ...

...vertical lines display on the screet when the TV is turned on. The lines have different colours. The picture is cear because there are lines.Could you help me please, what is the problem with my set? ...

vertical line on a 50 inch nec plasma monitor I have a 50 inch plasma monitor which has developed a blue, white and green line on the top left side of the screen about 3 inches in can anyone advise on

NEC 46FHD100 tv. This morning when I turned it on, the whole screen was covered in colourful vertical lines. I turned it off and when returning home and turning it on again, the screen stays black, no

Black line in the middle of the screen Suddenly a black line appers in the middle of my plasma screen. Infinity 42"pllasma. What can be the problem and how can I fix it? check for vertical ic it is ...

... (Not likely) 2) Defective panel. (possible as the entire line of an X,Y plane is dead.) 3) Poor connection at the panel from the processing module. (Possible as the signal levels are extremely low). ...

...NEC LCD 40 inch tv which now has no sound or picture with coloured lines down he screen, is it fixable or has screen given up?? Hi, Uh-Oh....Vertical lines, NO PICTURE. That is NOT good. Did your TV ...

NEC plasmasync42MP3 has just developed a black vertical column, about 3 inches wide, about a quarter of the way in from the left of the screen. The rest of the screen is unaffected. How can I fix this