...F1-06 is an error on the offset motor of the finisher. There is a problem in the offset motor, clear with SIM 3-3-6 1. changed the motor 2. check the offset motor sensor. 3. change the power supply, ...
Error code F1 Hello WHEN I SWITCHED ON my Sharp Ar-163 IT IS FLASHING F1 AND WILL NOT ALLOW ANY COPIES HOW CAN I FIX IT. Please help me You can hold down the start key when the F1 is displayed it will
error f1 en sharp sf 2530 F1 00-sorter communication trouble detected 01-paper jog malfunction detected 02-transport motor malfunction detected 04-indexer lower limit detected 05- indexer upper limit ...
Question about Sharp Office Equipment & Supplies
...F1 02 Content Sorter transport motor error Detail Transport motor drive trouble Cause Motor lock Check and remedy Check transport motor operation with SIM3-3. F1 03 Content Sorter guide bar rocking ...
Question about Sharp Office Equipment & Supplies
...F1 FIRST OF ALL CHECK WHAT IS THE SUB CODE .IF SUB CODE IS 00 ITS COMMUNICATION ERROR BETWEEN MAIN BOARD AND FINISHER.IF 01 FINISHER SHIFT PROBLEM.IF 06 FINISHER MOTOR PROBLEM.IF 10 THAT IS STAPLER ...
...F1 code: 00 = Lost communication with the sorter. 02 = Paper transport motor overload 04 & 05 = Bin sorter position error 06 = Shift motor overload 08 = Stapler position error or overload The first ...
sharp copier sf2530 error code f1 06 how can I fix this please Paper exit drive overloaded in sorter. Make sure that the finisher trays are not too full of paper.
Question about Sharp Office Equipment & Supplies
...error F1 06 Shift sort motor overloaded F5 02 Exposure lamp blown F6 00 Fax board problems 10 80 81 82 84 88 F9 00 Printer board problems 10 80 81 82 84 88 H2 00 Fusing unit temperature error H3 00 ...
Question about Panasonic Office Equipment & Supplies
error message 13 panasonic dp8020e copier / the wrench light and another light to the far left side that looks like lined paper are on and cannot print. I had some instruction but did not get them all
...F1-06 error is = Paper exit drive overloaded in sorter. This means that the exit unit is not driving/ turning properly/ fast enough. This could be that the motor is going bad, exit sensor is bad, ...
79 questions posted
Usually answered in minutes!
1,105 Questions
603 Questions
557 Questions
331 Questions
354 Questions