Sharp AR-C270 Color Copier "service h4 00" Questions

...service H4-00 my copier SHARPAR 5127 IS SAYING "call for service H4-00" what is the solution? please do the following : press #, interrupt, C, interrupt when display goes off enter 14 and pess print ...

H4-00 code you most likely have a blown fuser lamp or thermo fuse, & I would suggest contacting a service provider for replacement of the lamp or fuse. Good Luck!! I have the copier sharp ARM161 , but

...h4-00 is a fuser error. try to reset it first. if it doesn't reset then replace the fuser and then reset. to reset it you have to go into service mode. the entry into service mode varies slightly but ...

...that you have a Sharp copier? A H4-00 is a fuser error code. You may be able to reset it? There are a few different ways to get into service mode, but I don't know the model you have. Good ...

...Service H4-00 Good day, Please help me with this problem with a Sharp AR-M207, it shows an Error Call for Service H4-00. what does this mean and how to fix this. Thanks. # - intrrup key - clear - ...

00 H4-00 relates to the fusing unit not reaching the desired temperature. This could be due to a heat lamp or thermistor failure. I would recommend calling your local service engineer. hope this helps

...SERVICE CODE H4 00 Can anyone tell me what to do to fix the above error code for SHARP AR C250 Digital Color COPIER. SERVICE CODE H4 00. The copier w working fine up until the service code came on ...

service code h4 00 H4-00 code relates to the fusing unit not reaching the desired temperature. This could be due to a heat lamp or thermistor failure. I recommend calling your local service engineer ...

...FOR SERVICE EROR h4-00 The H4-00 code relates to the fusing temperature being to low. This could be a heat lamp or thermistor failure. call your local service engineer to come and take a

...service h4-00 H4-00 indicates that the fuser unit (right hand side where the hot rollers are) is not heating up. It could be a blown heater lamp or a blown thermal limiter. You can try resetting the ...