Sharp AL-1641CS Laser Digital Copier "service h5 01 ar" Questions

how do i fix a service code H5-01 on sharp copier AR-407 cleared all jammed documents Please click the link below. HOWTO Reset H5 01 Error on Sharp Laser Printer Copiers

...and now it is telling me call for service code H5 - 01 can I solve this problem on my own without calling a technician my machine is a sharp AR-M 207 model H5-01. 5 Continuous POUT not-reached ...

Service H5-01" Kindly help Check the white area of document glass and clean it or the copy lamp is not lighting. Hello my machine gives me this message to call service error H5-01 Sharp what key i can

...run a service mode to reset the machine: P * C * 14 (start) then 1 for Yes and follow on screen directions, code should clear out. MY SHARP COPIER AR-M206 SHOWS SERVICE ERROR CODE H5-01 WHAT DO I

...service h5 01 H5 01:3 continuous POD1 not-reaching JAM detection __Check and remedy___ Check JAM paper in the fusing section (Winding, etc.). Check POD1 sensor harness. Check the fusing unit ...

service code H5-01. I don't have that error code specifically but any error code that starts with an H has to do with the fuser section of the machine. It could be the thermistor, rollers, or the heat

...service h5-01 i know there is a way to clear that with a series of numbers in the programing menu or the key operator menu can you help H5-01 Refers to an exit sensor problem, open the left side door ...

H5-01 means there were five consecutive jams at the fuser section. Open the left jam door and look up in the fuser (heat) section and at the top of it You should find sheets crunched into an accordian

...H5-01 is a error code for the fixing unit is not at the correct temp. You can try to rest it in service mode with mode 16....If that will not clear the code you have a problem with the thermistor or ...

on again, the code H5-01 appeared. I tried to turn it off and on again still the code appeared. Please help me to solve this. call for service is a little pricey here. are all the tray doors closed...