Sharp AR-153E Copier "fuser warm error" Questions

...fuser does not warm to the required temperature to operate properly. For this error on this Lexmark model ... You have to replace your fuser assembly. (Assembly 115V fuser) (40X3569) I suggest you ...

Fuser error 50.2 HP4345 Can you please tell me how to correct this Fuser error 50.2 HP4345? You will have to replace the fuser assembly (the error refer to the fuser warm up temperature)

Fuser 50.1 error on HP 3500 printer 50.1 fuser error message showing on HP 3500 laser printer. Fuser is not hot. Took fuser out, returned it and made sure it was seated. Changed power cord. ...

warm up Fuser problem. Warm-up incomplete warm restart, hold down the 3 button till u get the trouble reset screen, perform T reset if the machine goes to ready clean up the thermistor. The code c0500

...fuser did not warm-up in the allowed time. Possible causing-- in order; Thermistor bad or out of position, fuser lamp bad, thermofuse bad, BICU board defective, power supply board bad, poor fusing ...

...fuser by touching the casing and see if it is warm after you have turned the machine back on..if it is warm the error could just be due to a build up of toner on the thermistor.. if you know about ...

...fuser warm up temperature problems could be -fuser thermister dirty ir defective -fuser lamp is disconnected or defective -fuser thermostat is defective you may go for the min time to service mode ...

warm up error meaning the fuser is not coming up to temperature correctly. This can be caused if the fuser is not fully seated in the connector. To check this just power off the printer, remove and re

...Fuser warm-up not complete within 110 seconds after starting. Cool-down error - Cool-down process not complete within 200 seconds. Low trouble temperature - The fuser temperature drops to the low ...

...Fuser Warm up Error ) Make sure that the power is coming directly from the wall outlet. DO NOT use a surge protector. Power off for 30 minutes. Power back on. If error returns, replace the fuser. ...