REMOVE H4 ERROR CODE MY COPIER SHOWS H4 AND I NEED THE MANUAL FOR SOLVING SIMILAR ERROR CODES. www.tinli.com.hk/PDF/AL1216.pdf Hope this helps. paul TENHO UMA COPIADORA SHARP 1651 CS E ESTA COM O ERRO
Sharp Copier AR-286 Error Code H4-01 Sharp Copier AR-286 Error Code H4-01 # * C* start 14 >1 Start you can remove this error by enter the sim14.
...error code H4-00 on the screen how can i get rid of it the error code indicates a fuser problem to reset this do the following: PRESS CLEAR KEY,AUTO PHOTO MODE KEY,CLEAR ,AUTO PHOTO , COPIER DISPLAY ...
error h4 have a Sharp AL1540CS MFM. It has been displaying the H4 code for a while. Clearing it would work for a time. Removed the fuser assy., and cleaned the temp sensor. It had a wad of toner
...error code H5-01 means??? Thanks [email protected] Make sure there is no paper jammed in machine, H5-01 means 5 jams same location. Use quality paper not recycled and make sure it is fresh not ...
...error, and had bits of red rubber around the fuser area. Bought a fusing assembly, part #DUNTW0459RSZZ for $120 online, and it was not difficult to install. Just unplug unit, remove four screws to ...
Question about Office Equipment & Supplies
...error code h4-00.Nothing will work and i was wondering if there is a way to reset it. The [H4-00] system error popped up when the power went out of the house. I called Sharp tech support ...
Question about Xerox Office Equipment & Supplies
...error means. H4 is fuser problem, probably needs the fuser tube replaced. Remove cabinet back (just a couple of screws), and open right door. You'll see fuser unit secured inside right door with 2 ...
Question about Sharp Office Equipment & Supplies
...error can show up for no particular reason. Try resetting using the following sequence: #,*,C,* (hash, star, clear, star) then enter '14' and then press the start button. The machine will reboot. If ...
Question about Sharp Office Equipment & Supplies
error returns. As far as the problem with these machines and the H4 codes goes: while you have the fusing unit out of the copier, remove two screws, slide the cover and remove it.
682 questions posted
Usually answered in minutes!
1,105 Questions
557 Questions
331 Questions
354 Questions
183 Questions