Sharp AL 1631 Copier "code l3" Questions

...CODE L3 CODE L3 The error is for the scanner mirror home position sensor. When the scanner mirror comes back to home (start) position if the photocell sensor doesn't see it due to be dirty or faulty ...

...code L3-00 I received an error recently "call for service code: L3-00". I have also noticed the fan does not stop running after a length of idle time, like it use to. What does this code mean? Is it ...

...code L3 my copier comes up with this code. What can I do to fix it fegarefhtasrjtsyijyt L3 Error Code - Mirror Return Fault. I would suggest checking for broken belt to mirror, and mirror

...code L3-00 Scanner will not retun home in time I have termeperd with the programming of ar 507 26 sub 59 and alter the scanner motor setup phase ie change it from 2 to 0 and it refuse to go back to ...

...code [L3-00] ... what does this mean The L3 code refers to your scanner not moving. One thing you can check is the scanner lock, which is a clear round dial located under the scanner bed (where you ...

...L3-00 code and need to reset to see if it is fixed. No service in this area. L3-00 means that the copy lamp assembly underneath the glass is not moving properly. 2 possible causes. The motor that ...

...code L3-00 Scanner will not retun home in time the scanner comes ot and coming in to home makes a zipping sound then slowly drags to home throwing L3-00 everytime. I tried adjusting the bracket ...

...code L3-00 on my Sharp AR-M237 can help you. [email protected] The L3-00 means that the scanner is not in home position. You can try turning off the machine and unplug it for a minute or so ...

...L3, and L5 are "illuminator malfunctions." An L2 code indicates that the ROS PWB has failed to detect a start of scan signal. A L3 is the laser beam will not go on. In english this means that the ...

...key, C (press these four buttons as soon as posible. The display will go off then enter the SIM codes and press