SharpVision XV-Z1U Multimedia Projector "new message lamp" Questions

...message reads failure to srike lamp. bulb is less than 200 hours used that ones are total ****... seems like lamp is broken .. my advice would be get a new projector(not LP70) other that get a new ...

New lamp gives same message When I turn on the projector I see a greenish yellow spot on the left side of the screen and a message to replace the lamp. When I put in a new lamp spot is still there and

...new housing it shows Error message I don't know whether you have taken all the precautions before replacing the lamp. Before and after the lamp replacement, lamp time has to be set. Otherwise, the ...

...message I have installed a new lamp and when I turn the projector on, I get the same "Lamp Approching End of Life" message. Any ideas? It is the 2nd new bulb I have tried with the same result. Optoma ...

... Lamps have an expected lifetime and the message indicates that the lamp is nearing that lifetime. Once reset, the counter will again trigger the message once this new lamp reaches that usage time. ...

...message " please replace the lamp " . I replaced a new lamp but when it start up it still display the same message. Pls, help me about this problem. I dont want to see this message. On your ...

...message? follow this steps and fix it. God bless you Secure the lamp cover and the air filter cover of the projector body if the projector does not power on. Ensure that the power cable is firmly ...

...message appearing. I have about 45 minutes to figure out how to change the bulb in as little time as possible. Also, will the warning go away once the bulb is replaced or will we need to do some sort ...

Why does my image flicker and them the lamp shuts off? My lamp won't stay on. The message in the book says lamp failure but the lamp is fairly new. the lamp with too high temperature working?

...new bulb in about four months ago. The bulb has about 200 hrs of use. Reset the lamp hours as follows. Press the Exit button on the projector for 3 seconds to display the total used lamp time. Press ...