Sharp Notevision PG-M20XU Multimedia Projector "coming air temp" Questions

...TEMP indicator will flash after the power is turned off) The air filter should be cleaned every 100 hours of use. If you clean the filter with a vacuum cleaner to clean off any accumulated dust. then ...

...temp. or are both fans supposed to run all the time first blow out any dust out of the projector with canned air. duat holds in heat. if the other fan is supposed to come on at first and doesn't, you ...

over temp light comes on at start up. one or more of the fans may not be working. also clean the projector out with canned air. if all else fails, replace the temp sensor.

...AIR FILTER AND RESTARTING PROJECTOR BLINKING TEMP INDICATOR COMES ON AND PROJECTOR LAMP SHUTS OFF All projectors are cooled by the use of a fan. The light chamber has its owned fan to extract the ...

...temp reach, the temperature sensor will become inactive. So boxlight shutdown. First you need to replace the fan, or check the supply dc voltage going to fan if it is stable. Before going through the ...

...air coming out is a little warm. what if anything is making my projector overheat, or is it not heating at all? We have same problem. But the time last longer after we turn on for about 15 to 20 ...

temp light comes on and the projector shuts off. I have replaced the bulb, but it still does this. Have you cleaned out the air filter recently. Do all the fans come on when it starts up for the short

Start up problem Projector turns on, eiki screen comes up, screen goes out, the warning temp. and ready light flash. Disconnected power and tried to restart, same scenerio. Clean air flow filters

Temp light comes on after one hour, the projector heats up very quickly, doe's the fan need replaced? strip the outer casings off and vacuum the dust from the inside and also clean the air intake ...

epson emp s4 red temp light comes on and projector won't work. Cleaned air filters, still same problem. Replaced lamp too. Still no go. Hi, Please all wiring and connectors for malfunction.