...cool down the system after a presentation? hi, To cool down the projector after use just press the Standby button and leave it in standby mode. The projector itself will cool down and will shut down ...
Question about Eiki Office Equipment & Supplies
...comes on to cool it down. All filters are clean HI there Is there any on scren messaes before shutting down and when shutting down - which of the LED's on the unit is flashing and what colour
Question about Dell Office Equipment & Supplies
cool down period for the lamp once the power button is pushed from on to off. For this model, the cool down period is 120 seconds after which the unit will fully power down. You can override this cool
...cool down) Every projector I have used in the past has a soft power down so the projector can use its fan to cool the lamp down. I can not see it on this model. Is there a way of doing this or do I ...
Question about Office Equipment & Supplies
...the projector work? Make sure not to shut down the projector after use. Wait until the fan stops. The fan is to cool down the bulb during and after use. Once the fan stops, then you can shut it
Question about Eiki Office Equipment & Supplies
fan will not turn off after lamp cools down. fan will run for days. is this after auto shut down ? check menu setting if this is set to READY, then it will wait until signal appears again at the input
...cool down. It does work and display a signal okay, but it is very loud. Sound like a fan?, but doesn't do it in cool down mode. Thank you. The main fan that cools the lamp is mostly high speed when ...
projector take lot of time to shut down? May be because it take a lot of time to cool down. The main culprit would be dust, blocking the air vents/air filters. Use a 1/4 inch paint brush to clean them
What is the purpose of the coolong pump? What sort malfunction could occur due to that? This system uses a cooling pump, to pump high pressure / high velocity air around the lamp dramatically ...
Question about BenQ Office Equipment & Supplies
...after 20 minutes and needs to cool before starting again. clean out the dust with canned air and make sure the fans work. if the lamp and power board can't cool down, it shuts down to prevent
8 questions posted
Usually answered in minutes!
1,105 Questions
603 Questions
557 Questions
331 Questions
354 Questions