Sharp XR-1S Multimedia Projector "turns off" Questions

again it is necessary to desconect the AC. Lamp was change and the problem continue. If the Panasonic Logo comes and then the projectors turns off, the main board of the projector requires replacement

...turns off automatically :( The projector behaved very wierd and gets turned off automatically.I keep on turning it again but it turns off again; not getting turned on even for 30 sec or so. Please ...

Turn projector on and the bulb turns off. The Turn projector on and the bulb turns off. The only way to shut the projector off is to pull the plug ballast/power supply issue. needs replacing.

...turns off in a few seconds I have an OPTOMA HD70 projector. It just turns on for a few seconds and then turns off. Put in a new bulb and still same response. Took it to a shop and they could not ...

...turns off randomly. Replaced bulb but same fault ocurrs? Will stay on for 20mins then turn off, re-boot will stay on for 3 hours then turn off. Now has just turned itself off 3 times in 30mins? HELP! ...

...turns off after 10 minutes or so So the projector turns the bulb off without warning in about ten miutes or so with out warning Go to the OSD menu and select the configuration menu scroll down and ...

What is the proper way to shut it off? Shut it off, when turned it back on the purple light flashes and two orange lights are on that says temp and lamp? You need to let the projector cool down after ...

The projector turned itself off after couple hours of use and the Temp. red light came on. Power Light turned red instead of orange as usual. After 3hrs I turned it back on, cleaned the dust off the ...

when i power off the projector it asks to confirm. can I turn this off and get the projector to power down with one button press? It is ok that it ask for confirmation whether you want to turn it off ...

Projector shuts off Planar PR3010 projector is ceiling mounted, and will intermittently turn off. The projector may not be on for long (2-5 minutes), and the projected image will turn black. Turning ...