...by third-party (non-Brother) ink cartridges leaking ink onto the Ink Sensor PCB and shorting out the cartridge sensor. In order to resolve this issue, a new Ink Sensor PCB will need to be
...Says I have bad cartridges or Sensor. Where is the cartridge sensor? Help?????????? wish to remove battery You must replace all ink cartridges with NEW ones before the machine will sucessfully
...carefully (be careful not to spill ink) 3.Wipe inside of printer (take special care about ink level sensor, it's where part of ink cartridge is transparent, to make it possible to measure level) ...
Question about Brother Office Equipment & Supplies
...and machine still saying ink empty- why? If you are using new cartridges, the problem is in the sensors. The ink sensors get dirty and malfunction. Remove the ink cartridges and thoroughly clean ...
...cartridges. On the back of the cartridge is a sloping section that protrudes. This fots in between a light sensing device that determines the ink level. What seems to happen is that the light sensor ...
what a cartridge sensor is my printer fail to detect new inserted cartridge This is a sensor in the unit that tell the processor that the cartridge is in place. Look into area where the cartridge goes
Question about Panasonic Office Equipment & Supplies
...the cartridge rests may not have broken ? E.The carriage cable may have got cut . f.the carriage sensor might have gone,Please replace the carrriage cable with sensor.. Happy Faxing ...
...me to do? It may sound silly, but are all the tapes removed from the drum and cartridge? The is a sensor that 'sees' the cartridge. If the sensor is blocked then it doesn't read the cartridge. When ...
cartridges are made with a plastic flashing on the drum shield that mates with a sensor actuator in the machine. Problem is, Panasonic made the same machine with sensor actuators in slightly different
note where the round, clear plastic "window is located on the cartridge. In the machine there are 2 sensors, one on top and one below where the cartridge.is in the machine. Take a cloth and clean both
48 questions posted
Usually answered in minutes!
1,105 Questions
603 Questions
557 Questions
331 Questions
354 Questions