Peavey AmpKit LiNK High Fidelity Electric Guitar Interface for iPhone and iPod Touch "input" Questions

How to get to the input jack on a bugera 62/62 amp head. I have a bugera 62/62 amp head and the input jack needs some work. I'm comfortable repair the connections I just can't figure out how to take ...

...information in the previous post is INCORRECT. DO NOT connect the output of the mixer to the MIC input. The mixer generates LINE level output that should go to the LINE-IN on the sound card. If

how to connect it to computer mic input how do i connect behringer bdi21 to computer mic input so i can record it? Instead of using the mic input on your soundcard try using the auxiliary input. You ...

No sound from amp I replace the RCA input jacks because one of them lost the outside ring. When I turned it on, no sound. I looked at the board again, and found that while I was soldering on the face ...

i just bought a marshall MG 100FX amplifier. What inputs do i use to wire from the amp to the cabinet. The model is the 212 and there are to inputs on the 212. The amp has two red inputs that are ...

One of the XLR inputs on my Europort EPS500MP3 mixer amp has stopped working. What could be the problem please? he issue you're describing with one of the XLR inputs on your Europort EPS500MP3 mixer ...

which input db to choose for mixer input in carlsbro amp powerline 2000 because there is 3 options +3db 0db -3db, i think 0db is high? That will depend on what instrument you are planning to plug into

What type of input Jack do I need for a ibanez guitar amp tbx30r? i believe you need a 1/4" unbalance plug for the amps input. Basically a guitar cord. If I am understanding the question. ? or if you ...

Will a MP3/iPod/CD player play through a Fender Frontman 65 or 212 "Power In" input jack? The power amp input jack takes "line level" input BUT is monaural (single channel). The output of an

...16 fx Recording from the board to Macbook sounds distorted. are you going from the board to a 'mic' input, or a 'line input' on the Mac? you will need to attenuate the signal to a mic input. try ...