...shows the the heating element is on. Yes, it should be hot enough when the light goes off. The numbers at the following site may not match but you should be able to find the information that you
Question about Salton Kitchen Appliances - Others
...light goes off before trying to bake the first pizzelle. The second light will turn on and off as the thermostat regulates the heat. The cooking time depends on the pizzelle iron that you use. A good ...
Question about Toastmaster Kitchen Appliances - Others
...light goes off before adding batter. Watch for steam coming from the iron. When the steam stops the waffle should be done. Keep track of the time that it takes to cook. Experiment with cooking time ...
Question about Waring Kitchen Appliances - Others
...light goes on but unit does not heat up. Found the thermal fuse in the white insulation on the bottom unit. Found replacement at Radio Shack ...
Question about Waring Kitchen Appliances - Others
...light goes on gut does not heat up... Waffle iron light goes on gut does not heat up The most common reason for not heating up is because of a blown thermal fuse. Apparently the controller lets the ...
...light, no heat. I have continuity on both heating elements but there is a little device which looks like a diode but may be a thermostat which has no continuity. It is inline with the power cord and ...
does not heat Ready light goes off send back to mfg. they will replace it with one that works. james Replace the thermal fuse.
...light never comes on. I posted the same problem (no heat) but may have found the answer. There is a component that cuts off the power if the unit gets too hot. My best guess name for it would be a ...
...light goes on but no heat.????? I semt for the fuse but can't figure out where it goes. Remove 4 Black Phillips Screws 2 on the front near the handle that flips Use a Good fitting Screwdriver These ...
...light goes on and I hear what I assume is a relay clicking on but no heat. Nothing visibly wrong when taken apart. Amost new..not a wear and tear problem! Does anybody have a schematic? signed ...
6 questions posted
Usually answered in minutes!
116 Questions
67 Questions
51 Questions
38 Questions
35 Questions