Westinghouse Turbo Swirl 78145 Ceiling Fan "speed control circuit" Questions

...speed control problem Just installed a new Hunter ceiling fan Paramount XP 23248. Turned on fan from wall switch. Was okay, But when adjusting speed with chain, there is only high, low and off. No ...

...or line, go to the speed controller , then go to the fan, then finally go to the neutral point. This completes the circuit. I will be happy to know more about this if it could not solve your

control in the remote. The fan speed is controlled by a thyristor or SCR device which could have shorted in the panel, thereby giving off the full voltage to the fan. You will need to remove the panle

...on If you're controlling from a wall switch, be sure the chain switch has been switched also.This is usually the one that controls the speed. This is assuming you have not tripped a circuit

...speed control, which presumably was destroyed by a power surge. The part is integral to the remote receiver in the fan housing. You can purchase spare parts for this fan through Home Depot (Hampton ...

...circuit board shows the following connections: Black wire Blue wire Yellow wire Are respective for the: High fan motor speed Medium fan motor speed Low fan motor speed I think the gray wire goes out ...

...speed fan with a red, blue, black an white wires, how are the supposed to be wired with power. the wires go to a little black box that appears to just be wires with no circuit board The BOX is a GE ...

Fan in room not working could be a faulty speed control or a faulty circuit get an accredited electrician in to check it out.

...speed control that specifically says it works for fans. Fan controls come in quite a few styles. The most common type has been around for quite some time and that is the rotary or dial type. The next ...

control, but the fan doesn't respond. Can't change speed, and there's no light either up or down. Originally thought the bulbs may have blown, but why is he fan speed button not working? Help! Hello :