GoVideo Go Video DVD/VCR Combo "child safe" Questions

...SAFE will flicker in the display window for a few seconds. 2Press C.LOCK again to switch off the child lock. OFF will appear in the display window. Note ? C.LOCK is not available on the DVD

...safe all the time?? Take a look at the online manual and look for the functions on your remote on page 43-45 and then check to see that you are the parent and not the child of a parent who set the ...

...safe" whenever I try to hit a button. I getting frustrated how do I fix this? I had the same problem. Turned out the Child Lock was on. Push the Child Lock button on the remote (it's below the 0 key) ...

...SAFE appears on display window Check the unit isnt on child lock, if the unit isnt on child lock, you may have a few different problems. It could be a blown component somewhere in the machine causing ...

...safe, how to unlock this , thanks You have pressed C.LOCK (child lock) which turns off the control buttons on the front of the unit Press C.LOCK again to switch off the child lock. OFF will appear in ...

...seconds helped get the VCR restarted from "safe" on the readout Yes, this fixed it. There was a button on the remote that said "child lock" that I pressed to fix this. YOUR CHILD LOCK BUTTON IS

SAFE message should disappear and you should be able to use the player again. (To activate the Child Lock again, press and hold the POWER button for about 10 seconds) I can't be 100% certain this will

...SAFE and will not let me do anything. I think there is a button on the remote that will unlock it. It is some sort of child safety lock. It hit it by mistake once and was going crazy trying to figure ...

...safe mode off. We have tried turning the VCR off to see if it will reset itself and pressed every button we can find, to no avail. What do you do if you lost your remote? Is there some master reset ...

...safe on front panel sounds like child lock has been activated. most likely button on remote control ( look for c.lock, etc) sometimes power button, play button, stop button etc on remote needs to be ...