Hitachi 42PD3000 42 in. Plasma Television "cool start remote work" Questions

...started flashing on and off on the screen. At that point I would need to turn the set off until it cooled down for a few hours. During all this the button controls on the TV stopped working and I ...

...start up, but the stand by light goes from red to no light and there is no picture or sound. So I give up then try later and it works as normal. I thought it could of over heated but when I checked ...

...Cool 1) and the light effect to be always on. Any idea on how I can remedy this i.e. not have the picture settings I make revert to factory every time the TV is turned off then on? Would it be ...

...remote controls power button didn't work for this problem) after maybe 5 go rounds it would stay on but eventually it got to the point where it would not stay on for more than 10 secs at all. (Even ...

...start and work fine, or it may run for as short a time as 15 seconds. The remote cannot be used during this time while red light is flashing. Just before the warranty was up we had to take this TV in ...

cool. Im concerned this did something to it. I dont know. The akai phone number is not working. They refer to another number that I believe is long distance, said press one and leave a message, did so

Remote- TV keeps clicking for about 10 minutes before the picture/volume stay on This is a classic "Hic-upping" switchmode power supply problem. The protection circuitry inside the SMPSU, has sensed a

...remote or power button does not make a difference. Owners manual says call Toshiba for service and the service manual says its a "blink" code indicating the TV is rebooting. My first guess is the ...

...start failing they get hot and expand. Then when you shut the unit down they cool. I have also seen bad soder connections fail as well on circuit boards. The board heats up and the soder connection ...