Hitachi 50V500 50 in. HD-Ready LCD Television "bulb reset" Questions

...you manual for lamp hours reset and how to change the bulb? These sets need to have lamp hours reset when you change the bulbs or they won't turn on. I might just be possible your bulb has burned

I replaced bulb, I have sound but no picture. There is no light in rear of T.V. If bulb is new, try resetting bulb life timer by owners manual, If needed, test and/or replace the ballast which ...

...the bulb is about to expire With the model number either Google "lamp timer reset" or call Sony; note that the lamp timer reset should be in the owner manual and is done with the Sony remote

...are running and that no of the air vents are clogged or blocked. Also did you buy a cheap alternative or authorised bulb for it? Factory reset with remote, power up tv immediately enter "MENU

How do you calibrated w52lcd after replacing bulb? You should not have to do any calibration if all you did was put in a new bulb. You may want to reset the bulb timer in the menu if there is one.

...reset bulb or lamp unit timer on a RCA DLP HD TV - model # HD50LPW52YX1 "paison" was correct and his solution did work for me. Make sure you first select TV on your remote. Now hold down the dvd/vcr ...

...bulb on the panasonic television and i do not know how to reset it with the remote. Most modes can be reset by holding the volume down button on the tv until the volume is all the way down. Continue ...

...reset, I took out the light bulb but what do i look for to recognize that it is a bad one? three lights on front of tv blinking and tv just doesn't turn on! plz help. There is a filament inside the ...

...reset the bulb timer? how is this done? thank you. Instructions should be with new lamp. Press and hold volume down on TV front while pressing PLAY, or SPLIT, or PIP on PAN TV remote aimed at little ...

...bulb. How do we reset to get the red light to go out? It's a Panasonic 52'' lamp #TYLA1001 press vol+ and up-arrow key both at the same time for 7 seconds. follow the command prompts to reset the ...