...stk 392-110)every year!can you suggest alternates that can last longer? stk 392-110 for matchline 46" philips rptv. some folks are suggesting stk 394-160 or stk 392-570 Use 392-150 the can ...
Question about Mitsubishi Televison & Video
...STK-392-110--IT USES TWO STK-392-570 CHIPS. IF WHATEVER SET YOU HAVE USES A STK-392-110 YOU CAN USE THE STK-392-150 TO REPLACE IT--it is a higher current device than the 110 chip---there are some ...
STK IC 392-110 Chips My blue convergence has gone out on my Toshiba 42hdx82 rp tv. After checking around I know I need to replace both STK IC Chips. Here is my question (2 parts)- At one electronics ...
STK IC 392-150 instead of the 110 for longer life and less likely overheating issues. Is this correct? I made the same repair in a Toshiba 42h81 I replaced the STK 392-110 and after a lot of searching
Question about Panasonic Televison & Video
...Tried to adjust convergence and now have warped areas on the screen where the red and green don't align. Replace STK 392-110 with stk 392-150 ( better).Check any resistor around stk ic. Thank ...
...stk-392-110 or stk 392-560 STK392-560 you will also likely need two 3.5 Amp pico fuses with the ICs you can get replacments with free instructions at the following link. ...
Question about Apex Digital Televison & Video
...a number like STK 392-110 STK 392-150 or STK 392-180. These devices solder in, You may also find a burned resistor or two, and there may be a small fuse blown in the circuit. (not all have a
Question about Hitachi Televison & Video
...is being pull to the center Hello the convergence IC's have failed and need to be replaced. the part number for the IC's are STK-392-110, have them replaced with STK-392-120 as these will last
...a stk-392-100 part, I would like to know what the blue resisters are next to it? correct part should be STK-392-110 and most of the light blue resistors that fail next to it are 2.2 ohm 2 watt. SD ...
Question about Panasonic Televison & Video
...Hi, thank you for visit fix ya. Here your solution: Replace STK 392-110 with stk 392-150 ( better), check any resistor beside stk ic , burn or open . If you have any question, I will be here. Thank ...
76 questions posted
Usually answered in minutes!
727 Questions
631 Questions
405 Questions
415 Questions
357 Questions