Hitachi 50DX20B 50" Rear Projection Television "red led ac" Questions

red led is ON. Removed cover and check power supply led's (D919, D920, D928, D930 D971 all green are ON. Red led D908 is ON). Horizontal board red PROTECT LED is blinking. If I unplug AC cord and wait

...red led when remote power on selected. Sometme both green and red come on together but still no power up, a couple of goes removing the AC supply seems to work until the next time the set is switched ...

on and the LED on the front of the HDTV is still glowing solid red, you may want to reseat the lamp. If reseating the lamp has not resolved the issue then your next step is to order a replacement lamp

...LED on the front of the HDTV is still glowing solid red, you may want to reseat the lamp. If reseating the lamp has not resolved the issue then your next step is to order a replacement lamp. Keep in ...

...Red status LED, self-diagnosis error 44, check for open F9A06 on the Power PCB part # 283P128050 on the Power PCB 2. Red lamp LED, self diagnosis error 34. Check for 5-volts DC at J-9 connector pin 1 ...

...Red status LED, self-diagnosis error 44, check for open F9A06 on the Power PCB part # 283P128050 on the Power PCB 2. Red lamp LED, self diagnosis error 34. Check for 5-volts DC at J-9 connector pin 1 ...

...Red, Blue, Green) doing the same thing at the same time, there are (unfortunately) multiple possibilities: 1) the AC to DC power supplies 2) the LED Driver Board 3) DLP driver, or DLP itself The most ...

...red LED on the main board, un-plug the tv for 30 seconds and then with the back cover removed plug the set back in and watch the led`s while someone else turns on the set, usually the led`s will ...

...led stays on and the red one blinks 2 very fast. I have checked the inverter windings at 3 for all 3 wires and the ground shows good. what could it be? I get 3 clicking sounds and nothing else. ...

...Red 'protect' LED illuminates dimly during this brief power-up time, gets bright and then intermittently flashes (very dimly) of all things after shutdown. There is no flash diagnostic feature for ...