...may it need coverging or the convergence ics are bad and there are some resistors in the convergence circuit that may be bad. trouble shoot the circuitc to see. try to do the convergence ...
Question about Philips Televison & Video
...convergence IC's. Can you please help me, I am sick of the bubbles at the top and bottom of my screen!?! Thanks!!!! Follow Instuctions on this website. Buy the replacement here Also better buying a ...
convergence integrated circuit were is that located on the set It is located internally and can be identfied by looking for the large heatsinks (aluminium) the ICs (two of them) would be labelled STK.
Question about Philips Televison & Video
...convergence circuit in this case. it is the power supply not giving the convergence circuit the power it needs to run. there are several parts that need to be repalced here. Or may be the convergence ...
circuit with a digital volt-ohm meter. Have you tried the consumer menu and located the convergence adjustments? If it only need touch up you should go there. And the numbers I gave you 062597 must be
convergence circuit in it. Considering the way you described how it was normal for a short time. I would look for cold solder joints on both IC's first and resolder as nessesary. If none are found
...Phillips T.V. I do not have the model number yet. He said it works but that the color towards the top of the screen doesn't look right, otherwise he said it works fine. He's getting rid of it because ...
Question about Mitsubishi Televison & Video
convergence circuit. I hope this information allows you to resolve this issue. If I have helped you, please help me, and rate this suggestion the highest FixYa rating. (Two Thumbs Up) If you cant rate
Question about Philips Televison & Video
...but it doesn't get dark or hard to see just the lines..... no lamp for this model, it uses three picture tubes but the three D looking picture is a convergence circuit problem and is
Question about Philips Televison & Video
my 55inch phillips tv model 51pw936317f wont turn on,but the red light is on,and it makes a ticking sound It is in shutdown, could be a short in the convergence circuit.
690 questions posted
Usually answered in minutes!
727 Questions
405 Questions
415 Questions
357 Questions
325 Questions